Charge the battery
Your battery has been partially charged at the factory. If the
device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger to the device.
3. When the battery is fully charged, disconnect the charger
from the device, then from the wall outlet.
You do not need to charge the battery for a specific length of
time, and you can use the device while it is charging. If the
battery is completely discharged, it may take several minutes
before the charging indicator appears on the display or
before any calls can be made.
Tip: If you have old compatible Nokia chargers, you can
use them with your device by attaching the CA-44
charger adapter to the old charger. The adapter is
available as a separate accessory.
USB charging
You can use USB charging when a wall outlet is not available.
When charging your device with the USB data cable, the
charging time is longer. USB charging efficiency varies
significantly. In some cases, it may take a very long time for
charging to start and the device to start functioning.
With USB charging, you can also transfer data with the USB
data cable while charging the device.
1. Connect a compatible USB device to your device using a
compatible USB data cable.
Depending on the type of the device that is used for
charging, it may take a while for charging to start.
2. If the device is switched on, select from the available USB
mode options on the display of the device.
Get started
© 2009 Nokia. All rights reserved.
10